ETEC EKEC4 Basic EV Charger

ETEC EKEC4 Basic EV Charger

EKEC4 basic type home EV charger can both wall/post mounting,socket type or plug type options,support single phase 3.6kW 7.3kW three phase 11kW 22kW charging,and DLB,RFID functions optionls.

Inquire NOW PDF
ETEC EKEC4 Basic EV Charger
ETEC EKEC4 Basic EV Charger

ETEC EKEC4 Basic EV Charger

Inquire NOW PDF

Product Profile

EKEC4 is a ecmonic design wallbox, internal components we choosing module din-rail product,

such as module design EV charge controller and module contactor,

RFID and DLB functions can be configured according to customer demand,

the products comply with IEC61851-1 standard.

 

Advantages:

1) Small size wall box,IP 65 IP degree

2) Insise module device are more easy maintain and repair, it using module contactor instead of relay

    will have a good electric life and electric clearrance promise, anti-gigh and low temperature

3)Different power 3.5KW/7.3KW/11KW/22KW are same charger housing

4)Can working with a DLB current monitoring device for a DLB function,the device can using

    CT for single phase or a  RS485 communication kWH meter for both single phase or theree phase

5)Inside controller with Modbus-RTU protocal and RS485

 

 

Product Introduction

Technical Data

EV charging modes Mode 3 charging
Rated voltage AC 240V ±10%, AC 420V ±10%
Rated current Max 16A, Max 32A
Rated frequency  50Hz
Over voltage category (OVC) OVC III
Insulation resistance R > 1 MΩ
AC withstand voltage 1430V
Impulse dielectric withstand voltage (1,2 μs/50 μs) (Uimp) 4kV
Protection against electric shock Class I
Electrical life (contactcor) 100,000
Electrical life (Interface) 100,000
Standby Power Consumption <8W
Type of EV connection Case B (Socket version) / Case C (Cable Version)
universal interface T1: SAE J1772, T2: IEC/EN 62196-2, GB/T: 20234.2-2015
Pollution degree PD 3
IP protection class IP54
Altitude during operation (m) <2000m
Altitude of test laboratory <50m
Work Humidity 3%~95%
Operation temperature -25℃— 40℃
Colling Natural Air Cooling
Mounting method mounted on walls, poles or equivalent positions:
Normal environmental conditions indoor use; Outdoor use
Product Dimension (mm) 357*245*123
Installation Dimension (mm) 180*280
The AC charger require external MCB for overload protection and short-circuit protection to be installed in upstream distribution box

Dimensions

Product selection form

    ●: Defult
Green: Simple Choice
Blue: Multiple Choice
Selection Code
Model   EKEC4
Case B/C Socket type (Case B) S
Cable type (Case C) Defaut value is 5M,other length can customized C
Socket & Plug Standard American standard Type 1(T1):SAE J1772 T1
Europe Standard Type 2(T2)T2:IEC/EN 62196-2 T2
China Standard :GB/T20234.2-2015 GBT
Power 3.6KW,AC230V±10% 50Hz,16A,1P+N+PE 3
7.3KW,AC230V±10% 50Hz,32A,1P+N+PE 7
11KW,AC400V±10% 50Hz,16A,3P+N+PE 11
22KW,AC400V±10% 50Hz,32A,3P+N+PE 22
Protection Configuration Device    
Overtemperature Protection Chip Overtemperature Protection
Residual Current protection RCMU IEC62955 standard AC30mA+DC6mA Residual
current protection (Should at least installation a
Type A RCD in front of Charger)
PEN falut protection Relay Using for UK TNS System for PEN loss protection 0
RFID RFID module with card Support swape RFID card stop and start charging 1
Electronic Lock Electronic Lock Support lock the plug when charging 2
DLB Current Transformer CT Connected in Main circuit only for single phase 3
kWH meter (out Station) kWH meter Connected in Main circuit both for
single phase or three phase, other brand meter
using pls checking the Charger usage manual
4
OV&UV protection, Over current
protection, voltage, current,
Power for real time monitoring
KwH meter (in station) a kWM meter with MID certificate 6
Surge Protective SPD Only for single phase 7
Emergency Stop Emergency stop switch   8

Note: Model Selection Example: EKEC4-S-T2-22-12

Recommend Products

Inquiry Basket()
Send An Inquiry

Get in Touch

×