The EKEPC3 smart Ccharger controller is OCPP1.6J protocol with WIFI, 2G-4G, ethernet net communication,which can communication with charger with a OCPP1.6J protocol backend,also we can support a RS485 communication for kWH meter, the controller addtional functions including:non-contact IC card connection module, residual current monitoring unit, DLB management, LCD dislay, kWM Meter,electronic lock, external emergency stop pushbutton, etc. These function must be NOTED when ordering.
| Model | EKEPC3-C/S |
| Mode | Mode 3 charging |
| Operating Voltage | 32A, 1-32A adjustable |
| Outputthe PWM Signal | Max:32A, 1-32A adjustable |
| Basic Function | 2:Overtemperature protection |
| Additional Function | 1:RCMU DC6mA leakage monitoring with a axuliary device of RCMU 2:Swape RFID card/NFC start or stop charging function with a axuliary device of RFID module and cards 3:LCD display function with a axiliary device of LCD screen 4:Elecronic lock function with a device Electronic lock 5:DLB function with a axuliary device of CT or kWH meter 6:Overvolatge&Undervoltage protection 7:Over current protection 8:voltage,current,Power for real time monitoring with a axuliary of kWH meter 9:Emergency Stop function with a axuliary device of Pushbutom switch |
| Protocol(communication) | -OCPP1.6J Protocol,Wifi,Ethernet communication |
| -Modbus-RTU protocal and RS485 communication only for kWH meter | |
| Output Auxiliary Voltage | DC12V/100mA\DC5V/100mA |
| Ambient Temperature | -40℃-+50℃ |
| Humidity | <=85% |
| Colling Method | Natural cooling |
| Installation Method | Din-Rail mounted |
