RFID Module and Card for  EKEPC3/EKEPCB2/EKEPCB3 Controller

RFID Module and Cards for EKEPCB2 Controller

Contactless IC card, 13.56MHz, M1 with protocol ISO14443A standard, IC-UID、 IC-CUID、 IC-FUID、 IC-UFUID, etc.

Inquire NOW PDF
RFID Module and Card for  EKEPC3/EKEPCB2/EKEPCB3 Controller
RFID Module and Card for  EKEPC3/EKEPCB2/EKEPCB3 Controller

RFID Module and Cards for EKEPCB2 Controller

Inquire NOW PDF

Product Profile

The charging station can be configured with contactless IC card swiping function, and charging can only be carried out through authorized IC card.

If the IC card is lost, the internal dip switch can be used to set the IC card losing module.

There are 2 IC cards which are authorized by the factory, unless specify that we can provide more IC cards.

 

Technical Data

EKEPCB2 Model 3 EV Charge Controller
Model EKEPCB2-C/S
Mode Mode 3 charging
Operating Voltage AC230V±10%,50Hz
Outputthe PWM Signal Max: 32A, 1-32A adjustable
Basic Function 1:RCMU DC6mA leakage monitoring
2:Overtemperature protection
3:Overvolatge&Undervoltage protection
4:Over current protection
5:voltage,current,Power for real time monitoring
Additional Function 1:Swape RFID card/NFC start or stop charging function with a axuliary
   device of RFID module and cards
2:LCD display function with a axiliary device of LCD screen
3:Elecronic lock function with a device Electronic lock
4:DLB function with a axuliary device of CT or kWH meter
5:Emergency Stop function with a axuliary device of Pushbutom switch
Protocol(communication) -OCPP1.6J Protocol,Wifi,Ethernet communication
-Modbus-RTU protocal and RS485 communication only for kWH meter
Output Auxiliary Voltage DC12V/100mA\DC5V/100mA
Ambient Temperature -40℃-+50℃
Humidity <=85%
Colling Method Natural cooling
Installation Method PCB mounted

Recommend Products

Inquiry Basket()
Send An Inquiry

Get in Touch

×
We value your privacy
We use cookies to provide you with a better online experience, analyse and measure website usage, and assist in our marketing efforts.
Accept All