EKDC3 60-480kW DC Fast Charger | High Power EV Charging Station
EKDC3 is a 60-480 kW floor-mounted dual-connector DC fast charging station for high-throughput public, fleet and commercial sites. Choose CCS2, CCS1, GB/T or CHAdeMO connector combinations with OCPP 1.6J, Ethernet, 4G and optional Wi-Fi connectivity.
● Output power: 60-480 kW
● Connector configuration: dual DC connectors; CCS2, CCS1, GB/T or CHAdeMO combinations available
● Charging modes: plug and charge, RFID and app
● Connectivity: OCPP 1.6J, Ethernet, 4G and optional Wi-Fi
● Installation: floor mounting; cabinet available with or without swing arm
Product Profile
Product Profile
EKDC3 is a floor-mounted DC fast charging station platform for high-throughput public and commercial EV charging. It covers 60-480 kW configurations in a common cabinet format and is available with or without a swing arm for cable management.
The dual-connector configuration can be specified with CCS2, CCS1, GB/T or CHAdeMO combinations. A 7-inch LCD, RFID, plug-and-charge and app-based charging modes support day-to-day driver access. The station uses ETEK's DC EV charge controller and supports OCPP 1.6J, Ethernet, 4G and optional Wi-Fi for remote monitoring, diagnostics and firmware updates.
Built-in protection includes overcurrent, short-circuit, grounding, surge, over/undervoltage, over/underfrequency and over/undertemperature protection, plus energy metering and an emergency stop button. EKDC3 suits public charging hubs, fleet depots, motorway service areas, retail car parks and other commercial parking locations.
Power-range selection
- EKDC1: 20-60 kW for compact and lower-throughput sites.
- EKDC2: 60-240 kW for commercial and public charging sites.
- EKDC3: 60-480 kW for high-throughput public and commercial charging hubs.
- EKDC6: 240-600 kW split systems for multi-point charging projects.
For connector and power-range guidance across the series, see ETEK DC fast EV charging stations.
Model Preparation Meaning
Model Preparation Meaning
| Model Preparation Meaning | ||||
|---|---|---|---|---|
| EK | DC3 | CC | 240 | B |
| 1 | 2 | 3 | 4 | 5 |
| 1 | ETEK | |||
| 2 | DC EV charging station design number | |||
| 3 | Connector combination: CC = 2 x CCS2; AA = 2 x CCS1; GG = 2 x GB/T; JJ = 2 x CHAdeMO; CG = CCS2 + GB/T; CA = CCS2 + CCS1; CJ = CCS2 + CHAdeMO; GA = GB/T + CCS1; GJ = GB/T + CHAdeMO; AJ = CCS1 + CHAdeMO. | |||
| 4 | Output power code: 60, 80, 120, 150, 160, 180, 240, 320, 360, 400 or 480 kW. | |||
| 5 | Power module configuration: A, B or C. | |||
Technical Data
Technical Data
| EKDC3 60-480 kW DC Fast Charging Station | |
|---|---|
| Technical item | Specification |
| Output power | 60 / 80 / 120 / 150 / 160 / 180 / 240 / 320 / 360 / 400 / 480 kW |
| Connector options | GB/T, CCS1, CCS2 or CHAdeMO; selectable dual-connector combinations |
| Connector quantity | Two DC connectors |
| Input voltage | AC 380-415 V, 3P+N+PE |
| Input frequency | 50/60 Hz |
| Output voltage | 50-1000 V DC |
| Status indicator | Green / yellow / red |
| User interface | 7-inch LCD display |
| RFID | MIFARE ISO/IEC 14443 A |
| Charging modes | Plug and charge, RFID and app |
| Communication protocol | OCPP 1.6J or other options |
| Communications | Ethernet, 4G and optional Wi-Fi |
| Electrical protection | Overcurrent, short-circuit, grounding, surge, over/undervoltage, over/underfrequency and over/undertemperature protection |
| Energy meter | Yes |
| Emergency stop button | Yes |
| Charging standards | EN/IEC 61851-1:2019; IEC 61851-1:2017; EN/IEC 61851-23:2014; EN/IEC 61851-24:2014; EN/IEC 61000-6-2:2019; EN/IEC 61000-6-4:2019; EN/IEC 61851-21-2:2021 |
| Ingress protection | IP54 |
| Impact protection | IK10; screen IK08 |
| Operating temperature | -30 to +50 degrees C |
| Operating humidity | 5%-95% |
| Operating altitude | < 2000 m |
| Dimensions | With swing arm: H 2000 x W 850 x D 600 mm. Without swing arm: H 1800 x W 850 x D 600 mm. |
| Installation | Floor mounting |
| Certificates | TUV SUD, CB, CE and UKCA |
